The Sherpa Atlas Roof Rack gives your Land Cruiser 250 or Lexus GX550 a full-length platform with configurable crossbar spacing. This Peak Series rack is listed for model years 2024–2027 on both vehicles. Plan the layout around the equipment you actually carry, then choose the front fairing to suit your lighting plans.
Plan your Land Cruiser 250 or GX550 roof setup
Nine crossbars provide attachment locations across the roof rather than restricting you to a fixed pair of bars. During assembly, you can position the remaining crossbars to suit your load. The sideplates also offer openings for securing cargo with straps. Check each item's mounting hardware and required spacing before deciding where it will sit.
For a tent, cargo case or awning setup, work out the mounting arrangement before loading the rack. The rack's published ratings do not replace the vehicle's roof limits or the limits of your accessory mounts. Account for the rack itself and every item carried overhead; follow the lowest applicable limit for your complete setup.
Choose the wind fairing
Half Height: planning a single-row light bar
Select the shorter fairing if a single-row light bar is part of your build. This is the lighting-oriented choice offered for this rack. Confirm the bar's dimensions and mounting requirements rather than assuming any light will fit.
Full Height: no front light bar planned
Choose the taller fairing when your rack setup does not include a front light bar. Both choices belong to the same Atlas model; the option changes the fairing configuration, not the vehicle fitment.
Rack specifications and supplied components
-
Fitment: Toyota Land Cruiser 250 and Lexus GX550, model years 2024–2027.
-
Crossbar set: Nine bars, each 50 inches long.
-
Approximate rack weight: 65 lb.
-
Listed rack dimensions: Length 97.8 inches; width 50.5 inches; height 2.5 inches.
-
Sherpa rack load ratings: Dynamic 400 lb; static 700 lb.
-
Sideplate material: Aircraft-grade aluminum, 1/4 inch thick.
-
Surface treatments: Textured black powder coating on the rack, anodized black crossbars and black-oxide-treated stainless hardware.
-
Mounting: Drill-free installation.
-
Manufacturer warranty listing: Lifetime; coverage is subject to Sherpa's warranty terms.
The package supplies two sideplates and the nine-bar set, plus six mounting brackets with rubber seals. It also contains a pair of adjustable leveling mounts, your selected fairing with its edge trim, and the hardware needed to assemble the rack. Equipment pictured on the vehicles is not a substitute for checking this component list.
Installation resources and ongoing checks
Use Sherpa's model-specific guide to prepare for installation, including removal of an existing factory rack when applicable. The instructions cover roof spacers, mount alignment, front support adjustment and fairing edge trim. Follow the guide's hardware instructions rather than treating this overview as a fitting procedure.
Download the Atlas installation guide, version 7 and watch Sherpa's Atlas installation video.
Sherpa recommends a first rack inspection within 100 miles, followed by checks at 500-mile intervals. Follow its installation and off-road-use recommendations, and inspect your attachment hardware as part of preparing the vehicle for a trip.
Atlas questions before ordering
Is this the full Atlas or the Atlas Sport?
This listing is for the full-length Atlas in Sherpa's Peak Series. Its current specification includes nine 50-inch bars. It is not an Atlas Sport listing.
Does Atlas installation require new roof holes?
No roof drilling is specified for this model. Sherpa's guide uses the existing roof mounting locations and details the spacers and seals needed for the installation.
How should I read the two load ratings?
The 400 lb figure is Sherpa's dynamic rack rating, while 700 lb is its static rating. These are rack specifications, not permission to exceed your vehicle's roof capacity. Check the vehicle documentation and the mounting instructions for everything you add.
Can I move the crossbars for my equipment?
The installation guide allows the remaining bars to be spaced for the load being carried. Establish the required mounting positions for your equipment before tightening them into place.
Does the listed height tell me my new garage clearance?
No. The 2.5-inch measurement is part of the manufacturer's rack dimensions. Measure your completed vehicle setup, including any cargo, instead of using that figure as an installed-height increase.
Shipping for this order
To keep our prices on large and heavy Sherpa products as low as possible, a separate shipping fee is calculated at checkout. All other brands in our store include free shipping.
Free onX Maps Subscription
A free three-month subscription to onX Off-Road Maps is included with your order.
